The Nangka is an Octagonal model with half a wrap around veranda and large sliding windows along the full perimeter of the veranda. The sided area is 65 m2 , whereas the living takes up 21.8 m2, the open kitchen 4.9 m2, the bedroom 17 m2, the bathroom 8.7 m2, utilities 5.8 m2, store room 1.7 m2, and  half bath 2 m2. The veranda area is 44 m2. This model is ideal for a permanent residence. 

This model is also available with a full wrapped around veranda. 

All door- and window hardware is copper or brass. The unit has an open structure, hence no ceilings, except for the bathroom which is fitted with bamboo matting. The roof section is made from trusses, rafters and purlins  (all in sight) respectively covered with bamboo matting, plywood and thatch, wood shingles, ceramic tiles or corrugated sheathing. The standard house has double board sidings. Floor -and siding boards are 25 mm thick (1"). All wood used and wood fixtures are in accordance with our technical specifications <specifications>. The kit comes with a set of assembly drawings and a detailed assembly manual which includes pictures taken during the pre-assembly process. Optionally we can provide the plumbing and electrical lay out drawings. The unit can be re-assembled with little manpower, however, it is advised that some DIY experience is available. 

The estimated lead time for this unit is between 17 and 23 weeks, depending on the material and building option chosen.

Estimated volume: between 36 m3 and 53 m3, depending on the material option chosen

Required container: 1 x 20 ft or 1 x 40 ft  (depends on material option)   

Click <here> to return to the 1-bedroom page