|
What is included in the package
 | Floor main and sub beams, columns, pedestals, floors, sidings, roof
framing + covering, standard doors and windows, bathroom and toilet
ceilings with bamboo matting, bedroom ceilings with bamboo matting,
stainless steel standard hinges, locks and handles, veranda railing (if
any), veranda stair (if any), hurricane anchors (if required), wood
protection. |
| Full set of design drawings. |
| Assembly manual + detailed assembly drawings accompanied by pictures
taken during pre-assembly. |
| Detailed drawings showing the locations for the shallow foundation
footings. |
| Free of charge advice via e-mail during the re-assembly should this
be necessary. |
Optional features at additional costs
| Bangkirai, Merbau, Camphor or Kempas siding and/or flooring boards
|
| Simpson foundation strips (1). |
| Insulated glass, tempered glass, beveled glass, stained glass or any
other type of glass, except for the glass referred to in “Materials”. |
| All of our designs are based on the use of shallow concrete
foundation footings. We can provide a foundation advice in the event
that such shallow footings is not an option. |
| Electrical conduits, switches and sockets. |
| Potable water and sewer lines (PVC) or tap-ins only (depending on
the wishes of the client). |
| Wall and/or roof insulation. |
| Furniture. |
| Cabinets, wardrobes, cupboards, vanities. |
| Kitchen and/or bathroom appliances. |
| Any type of window or door deviating from our standard models. |
| French polishing for the interior. |
| Bali style carvings. |
| Structural calculation (2). |
| Involvement of a local engineer or architect to rubber stamp the
plans. |
| Additional drawings, not part of our standard package. |
| Hardware other than used for our standard package. |
| Electrical and/or plumbing design. (3). |
| Ceilings in addition to those mentioned under "Materials". |
| Partitions in addition to those shown on the standard drawings. |
| Change of bamboo bathroom/toilet ceilings into rattan or hardwood
ceilings. |
| Structural and/or architectural changes and/or additions.
|
(1) We do not supply Simpson strips and its fixing bolts. We will advise on
the type and the required volume. Client may purchase these strips and
install them following our assembly instructions.
(2) A static structural calculation will be submitted
when a County or Building Authority requires so. The calculation will
include an analysis for hurricane wind force and/or earthquake force, if
applicable for that region.
The structural calculation will be based on the latest USA Building Codes
(IBC 2006, International Building code and the IRC 2006, the International Residential Code).
(3) To this end the client needs to submit a sketch or
drawing showing the locations of sockets, switches, water and sewer
tap-ins.
Click
<here> to
return to the 1-bedroom page on this site
Click
<here> to
return to the 2-bedroom page on this site
Click
<here> to
return to the 3-bedroom page on this site
Click
<here> to
return to the large homes page on this site
Click
<here> to
return to the 2-storey page on this site
Click
<here> to
return to the Modular system on this site
|
